Hp Proliant Dl160 G6 Memory Slots

Posted on by admin
Hp Proliant Dl160 G6 Memory Slots Average ratng: 8,9/10 296 reviews
PrintRate this content

DDR3 Memory population guidelines

NOTE: Memory configurations listed do not apply to 'Factory Integrated Models'.

Some DIMM installation guidelines are summarized below:

  • For servers with eighteen (18) memory slots:

    Dark souls equipment guide. The game was developed alongside but was handled by two mainly separate teams. He has been fully corrupted by the Dark Soul and demands the Ashen One's portion of it. Promotion at 2015The development of the game began in mid-2013, prior to the release of Dark Souls II, whose development was handled by Tomohiro Shibuya and Yui Tanimura instead of the series creator,. He is finally struck down, allowing the Ashen One to obtain his blood and the Dark Soul.Development.

    • There are three (3) channels per processor; six (6) channels per server

    • There are three (3) DIMM slots for each memory channel; eighteen (18) total slots

    • Memory channel 1 consists of the three (3) DIMMs that are closest to the processor

    • Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor

  • DIMM slots that are white should be populated first

  • Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)

  • Do not install DIMMs if the corresponding processor is not installed

  • If only one processor is installed in a 2CPU system, only half of the DIMM slots are available

  • To maximize performance, balance the total memory capacity between all installed processors

  • It is not required, but it is recommended to load the channels similarly if possible

  • User can only have up to eight (8) ranks installed per channel

  • User can only install two quad-rank DIMMs per channel

  • User can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty

  • Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel

  • Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset

  • For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically

  • For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slotswill be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system

  • No mixing DIMM voltage; all DIMMs must be the same voltage

Registered DIMMs (RDIMMs)
DIMM Rank ->
Quad Rank (4R)
Dual Rank (2R)
2 GB
8 GB
4 GB
2 GB
2 GB
1333
1066
1066
*
1333
18 slot servers
18
*
12
*
MAXIMUM CAPACITY (GB)
36
144
48
*
24
1 DIMM Per Channel
1333
*
1333
*
2 DIMM Per Channel
1066
*
1066
*
3 DIMM Per Channel
800
*
*
*
NOTE:

  • Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities.

  • If DIMM speeds are mixed, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if theslower DIMM is on the other processor:

    eg: a) If a 1x 1066 MHz DIMM is installed in channel 1 and 1x 1333 MHz DIMM in channel 2, it will still run at 1066 MHz.

    b) If a 1x 1066 MHz DIMM is installed in channel 1 and 5x 1333 MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the otherchannels, it will run at 1066 MHz.

  • If 3DPC is installed in one channel (if applicable) and 1DPC in all other channels, it runs at 800MHz.

  • 95 Watt CPU's are required for 1333 MHz DIMM speeds. All other CPU's are capable of up to 1066 MHz.

  • References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.

DIMM Identification

The memory subsystem may be populated with either RDIMMs or UDIMMs, but mixing the two types is notsupported. To determine DIMM characteristics, use the label attached to the DIMM and the followingillustration and table.

Description
1
-
Rank
2R = Dual-rank
3
x4 = 4-bit
4
10600 = 1333 MHz
5
R = RDIMM (registered)

DIMM Slot and configuration diagrams

Basic memory slot & population diagram

NOTE: Population order; start with 'A' first, 'B' second, 'C' third, etc.
CPU1
Slot #
Slot #
Chnl 1
G
G
2
2
3
3
Chnl 2
H
H
5
5
6
6
Chnl 3
I
I
8
8
9
9

Standard memory configuration (1 CPU model)

NOTE: 6 GB, consisting of three (3) 2 GB dual-rank PC3-10600 RDIMMs.
CPU2
Population order
Population order
1
1
Chnl 1
D; empty
D; empty
A; 2 GB DIMM
A; empty
4
4
Chnl 2
E; empty
E; empty
B; 2 GB DIMM
B; empty
7
7
Chnl 3
F; empty
F; empty
C; 2 GB DIMM
C; empty

Standard memory plus optional memory (1 CPU model)

NOTE: 54 GB, consisting of three (3) 2 GB RDIMMs plus six (6) 8 GB RDIMMs:

  • 3x 2 GB dual-rank PC3-10600 RDIMMs

  • 6x 8 GB dual-rank PC3-8500 RDIMMs

CPU2
Population order
Population order
1
1
Chnl 1
D; 8 GB DIMM
D; empty
A; 2 GB DIMM
A; empty
4
4
Chnl 2
E; 8 GB DIMM
E; empty
B; 2 GB DIMM
B; empty
7
7
Chnl 3
F; 8 GB DIMM
F; empty
C; 2 GB DIMM
C; empty

Standard memory replaced with optional memory (1 CPU model)RDIMM maximum configuration

NOTE: 72 GB, consisting of nine (9) 8 GB dual-rank PC3-8500 RDIMMs.
CPU2
Population order
Population order
1
1
Chnl 1
D; 8 GB DIMM
D; empty
A; 8 GB DIMM
A; empty
4
4
Chnl 2
E; 8 GB DIMM
E; empty
B; 8 GB DIMM
B; empty
7
7
Chnl 3
F; 8 GB DIMM
F; empty

UDIMM maximum configuration (1 CPU model)

NOTE: 12 GB, consisting of six (6) 2 GB dual-rank PC3-10600 UDIMMs.
CPU2
Population order
Population order
1
1
Chnl 1
D; 2 GB DIMM
D; empty
A; 2 GB DIMM
A; empty
4
4
Chnl 2
E; 2 GB DIMM
E; empty
B; 2 GB DIMM
B; empty
7
7
Chnl 3
F; 2 GB DIMM
F; empty
C; 2 GB DIMM
C; empty

Standard memory replaced with optional memory (2 CPU model)RDIMM maximum configuration

NOTE: 144 GB, consisting of eighteen (18) 8 GB PC3-8500 RDIMMs.
CPU2
Population order
Population order
1
1
Chnl 1
D; 8 GB DIMM
D; 8 GB DIMM
A; 8 GB DIMM
A; 8 GB DIMM
4
4
Chnl 2
E; 8 GB DIMM
E; 8 GB DIMM
B; 8 GB DIMM
B; 8 GB DIMM
7
7
Chnl 3
F; 8 GB DIMM
F; 8 GB DIMM
C; 8 GB DIMM
C; 8 GB DIMM

UDIMM maximum configuration (2 CPU model)

NOTE: 24 GB, consisting of twelve (12) 2 GB dual-rank PC3-10600 UDIMMs.
CPU2
Population order
Population order
1
1
Chnl 1
D; 2 GB DIMM
D; 2 GB DIMM
A; 2 GB DIMM
A; 2 GB DIMM
4
4
Chnl 2
E; 2 GB DIMM
E; 2 GB DIMM
B; 2 GB DIMM
B; 2 GB DIMM
7
7
Chnl 3
F; 2 GB DIMM
F; 2 GB DIMM
C; 2 GB DIMM
C; 2 GB DIMM
NOTE: Capacity references are rounded to the common Gigabyte values:

  • 1 GB = 1024 MB

  • 2 GB = 2048 MB

  • 4 GB = 4096 MB

  • 8 GB = 8192 MB

Memory options

NOTE: This server does not support mixing RDIMMs and UDIMMs. Attempting to mixthese two types causes the server to halt during BIOS initialization.
Option part number
HP 2 GB 2Rx8 PC3-10600R-9 kit
HP 4 GB 2Rx4 PC3-10600R-9 kit
HP 4 GB 4Rx8 PC3-8500R-7 LP kit
HP 8 GB 2Rx4 PC3-8500R-7 kit
Unbuffered with ECC DIMMs (UDIMMs)
500668-B21
500670-B21
NOTE: All DDR3 memory option kits consist of one DIMM per kit.

Click here to use the Online DDR3 memory configuration tool for detailed memory configuration rules and guideline.

Link to the list of available documents

Click here to view the list of documents available for HP ProLiant ML350 G6 Server .

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

HP ProLiant DL380 G6 Server - Configuring Memory. DDR3 memory population guidelines. DIMM slot and configuration diagrams. Standard memory replaced with optional memory (1 CPU model) Standard memory replaced with optional memory (2 CPU model) Memory options. DDR3 memory population guidelines.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!

Hp proliant dl360 g6 memory slots Discover an incredible casino slot game and be like a Great hp proliant dl360 g6 memory slots Pharaoh - the Lord of the Egyptian lands.Both on the web and in the offline world, many folks find the slot machine games a lot less stressful and much simpler to play than hp proliant dl360 g6 memory slots games like black jack and roulette.When you double down, you. Hp proliant dl360 g6 memory slots Discover an incredible casino slot game and be like a Great hp proliant dl360 g6 memory slots Pharaoh - the Lord of the Egyptian lands.Both on the web and in the offline world, many folks find the slot machine games a lot less stressful and much simpler to play than hp proliant dl360 g6 memory slots games like black jack and roulette.When you double down, you. Slots Qty 18. Memory Specification Compliance. HP ProLiant DL160 G6 - Xeon E5606 2.13 GHz - Monitor: none. Series Sign in to comment. Be respectful, keep it civil and stay on topic.

  1. Was the information on this page helpful?
Please wait while we process your request.
PrintRate this content

Product description

The HP ProLiant DL360 G6 targets cost sensitive 1U dense environment, which value the strong ProLiant manageability features incorporated into our enterprise portfolio offering. The DL360 G6 steps up the fault tolerant in an Ultra-Dense platform with redundant power, redundant fans, mirrored memory, embedded RAID capability, and Full-Featured remote Lights-Out management.

Product features

Description
Six-Core processors

  • Intel Xeon processor X5670 (2.93 GHz,12MB L3 Cache, 95 W, DDR3-1333, HT Turbo 2/2/2/2/3/3)

  • Intel Xeon processor X5660 (2.80 GHz, 12MB L3 Cache, 95 W, DDR3-1333, HT Turbo 2/2/2/2/3/3)

  • Intel Xeon processor X5650 (2.66 GHz, 12MB L3 Cache, 95 W, DDR3-1333, HT Turbo 2/2/2/2/3/3)

  • Intel Xeon processor X5570 (2.93 GHz, 8MB L3 Cache, 95 W, DDR3-1333, HT Turbo 2/2/3/3)

  • Intel Xeon processor X5560 (2.80 GHz, 8MB L3 Cache, 95 W, DDR3-1333, HT Turbo 2/2/3/3)

  • Intel Xeon processor X5550 (2.66 GHz, 8MB L3 Cache, 95 W, DDR3-1333, HT Turbo 2/2/3/3)

  • Intel Xeon processor E5540 (2.53 GHz, 8MB L3 Cache, 80 W, DDR3-1066, HT Turbo 1/1/2/2)

  • Intel Xeon processor L5530 (2.40 GHz, 8MB L3 Cache, 60 W, DDR3-1066, HT Turbo 1/1/2/2)

  • Intel Xeon processor E5530 (2.40 GHz, 8MB L3 Cache, 80 W, DDR3-1066, HT Turbo 1/1/2/2)

  • Intel Xeon processor L5520 (2.26 GHz, 8MB L3 Cache, 60 W, DDR3-1066, HT Turbo 1/1/2/2)

  • Intel Xeon processor E5520 (2.26 GHz, 8MB L3 Cache, 80 W, DDR3-1066, HT Turbo 1/1/2/2)

  • Intel Xeon processor L5506 (2.13 GHz, 4MB L3 Cache, 60 W, DDR3-800)

  • Intel Xeon processor E5506 (2.13 GHz, 4MB L3 Cache, 80 W, DDR3-800)

  • Intel Xeon processor E5504 (2.00 GHz, 4MB L3 Cache, 80 W, DDR3-800)

  • Intel Xeon processor E5502 (1.86 GHz, 4MB L3 Cache, 80 W, DDR3-800)

NOTE:

  • Up to 2 processors supported. Performance model configurations include two processors.

  • HT Indicates that the processor model supports Intel /Hyper-Threading technology

  • Turbo indicates the maximum potential frequency increment when using Intel turbo boost technology, with 4, 3, 2 and 1 cores active.

  • DDR3 Speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of Dual In-line Memory Modules (DIMMs) installed.

  • For the Intel 5500 Series, the letter preceding the model number indicated the performance/wattage of the processor. X denotes high performance/wattage; E denotes Enterprise performance/wattage (Mainstream); and L denotes lower wattage.

12MB (1 x 12MB) Level 3 Cache on the 5600 Series 6-Core models
NOTE: All processor models except for those identified below.
Chipset
Click here for more information regarding Intel chipsets .
Advanced ECC (Multi-bit error protection)
Lock-step mode
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
12GB (6 x 2GB) RDIMM
6GB (3 x 2GB) RDIMM
4GB (2 x 2GB) RDIMM
4GB (2 x 2GB) UDIMM
192GB (12 x 16GB) for registered memory configurations
48GB (12 x 4GB) for unbuffered memory configurations
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1333 MHz, 1066 MHz, or 800 MHz.
One HPE NC382i Dual-Port multifunction Gb Server adapter (Two ports total) with TCP/IP Offload engine, including support for Accelerated iSCSI
Technology
Connector Width
Form Factor
PCI-e
x8
Low profile slot
PCI-e
x16
Full length, full height slot
PCI-X(133 MHz, 3.3 Voltage)
x8
NOTE: * Default bus assignment (In decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.

** Indicates the number of physical electrical lanes running to the connector.

HP Smart Array P410i/Zero Memory Controller (RAID 0/1/1+0)
HP Smart Array P410i/256 MB Controller (RAID 0/1/1+0/5/5+0)
HP Smart Array P410i/512 MB BBWC Controller (RAID 0/1/1+0/5/5+0)
HP Smart Array P410i/Zero Memory Controller (RAID 0/1/1+0)
Available upgrades: 256MB, 512MB with BBWC, battery kit upgrade (For BBWC), and Smart Array Advanced Pack (SAAP)
None standard
None standard
Optional DVD-ROM, DVD-RW or Slimline floppy drive
None standard
Up to 8 Small Form Factor (SFF) drive bays total
NOTE: 4 bays standard in entry/base and High Efficiency models, with optional upgrade of 4 additional bays with the SFF HDD Backplane kit (516966-B21).
2.4TB
Hot-Plug SATA
8 x 250GB SATA
1
1
1
1
2
1
1
Integrated ATI ES1000, 32MB video standard

  • 16 bit color: Maximum resolution of 1600 x 1200

  • 32 bit color: Maximum resolution of 1280 x 1024

NOTE: Maximum resolution available via iLO 2 remote console is 1280 x 1024.
1U Rack form factor (1.75 in), less than 70.5 cm (28 in) deep
High voltage power cord ships standard with all part numbers. Localized cables included with geographic specific models in other world regions.
NOTE: ProLiant DL servers no longer ship standard with NEMA power cords (187335-001) that allow connection to 110 V US wall outlets in a home or office. ProLiant DL servers are primarily connected to Power Distribution Units (PDU's) in data center racks so they now ship standard with only a PDU Power cord (416151-B21). If a user wishes to power a ProLiant DL Server using a 110 V receptacle (NEMA-15), the above NEMA power cord must be ordered separately.
Click here to see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units.
HPE has a new common slot power supply bay for ProLiant power. This design provides the end user with commonality in power supplies across multiple platforms to save on the cost of spares and allows HPE to offer multiple power solutions to fit the needs. HPE's new common slot power supplies are designed for highest efficiency to provide power efficiency without degrading performance of the ProLiant. Power supplies will have efficiency ratings up to 92%. There are three right size power options available, depending on the configuration of the server configuration. To make sure correct power supply, use the HPE Power Advisor to decide the Right-Size for the configuration.
HPE offers multiple power supply options:

  • 460 W, common slot, 92% efficiency 80PLUS GOLD

  • 750 W, common slot, 92% efficiency 80PLUS GOLD

  • 1200 W, common slot, 90% efficiency 80PLUS SILVER

HPE's ProLiant common slot power supplies (460 W and 750 W) meet multiple energy efficiency initiatives. Climate savers computing initiative GOLD, 80PLUS GOLD and plans on offering models that meet the energy star for server requirements when they are published.
HPE's ProLiant common slot power supplies (1200 W) meet multiple energy efficiency Initiatives. Climate savers computing initiative bronze, 80PLUS SILVER power supply requirements.
3 fans ship standard in 1 processor models
N+1 fan redundancy standard
NOTE: The processor option kit contains the additional 2 fans, when upgrading the 1 processor models. A Fan Option kit can also be purchased separately for use with PCI Graphics card upgrades.
The TPM is a microcontroller chip that can securely store artifacts used to authenticate the server platform. Windows BitLocker Drive Encryption (BitLocker) is a data protection feature available in Windows Server 2008. BitLocker leverages the enhanced security capabilities of a TPM version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline.
ACPI 2.0b Compliant
WOL Support
PXE Support
SMBIOS 2.6.1
Power-ON password
Diskette drive control
QuickLock, network server mode
Serial interface control
iLO has 12 customizable user accounts and SSL Encryption
iLO Advance pack supports directory services integration and two-factor authentication
The HPE ProLiant DL360 quick deploy rail system provides tool-free support for racks with square or round mounting holes (Including Compaq/HPE 7000, 9000, 10000 and HPE series) with an adjustment range to fit a rack depth of 21.25 in to 37.75 in.
HPE ProLiant DL360 Telco rack kit:
Support for all 2-post Telco Racks requires the use of the standard rack kit and an additional option kit from rack solutions.

Software overview

Description

  • Microsoft Windows Server

  • Microsoft Windows Server Hyper-V

  • Red Hat Enterprise Linux (RHEL)

  • SUSE Linux Enterprise Server (SLES)

  • Oracle Enterprise Linux (OEL)

  • Solaris 10 for x86/x64 based Systems

  • NetWare

  • VMware

  • HPE Citrix Essentials for XenServer

NOTE:Click here for more information on HPE's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for the server.
HPE Insight control suite installs and licenses the following components by default using a wizard-based integrated installer:

  • HPE Systems Insight Manager (SIM)

  • HPE iLO Advanced Pack

  • HPE Insight Power Manager software

  • HPE Performance Manager module

  • HPE Vulnerability and Patch Manager module

  • HPE Rapid Deployment Pack

  • HPE Virtual Machine Manager software for ProLiant

NOTE: HPE Insight Server Migration software for ProLiant can be installed from the HPE Insight Server Migration software for ProLiant CD included in the Insight Software media kit.

Click here for additional product and licensing information about HPE Insight Control suite.

As of Feb. 1, 2009, HPE iLO Power Management Pack is being discontinued. End user can either purchase HPE Insight Control suite which contains all the components of IPMP or the standalone components which include iLO Advanced, insight power manager and SIM.

HPE ProLiant onboard administrator functions without additional software, and can be accessed from any location via a web browser. It works hand-in-hand with HPE SIM, insight control, and insight dynamics - VSE suite helping end users unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business.

  • HPE SIM

  • HP Insight Rapid Deployment software

  • HP Insight Server Migration software for ProLiant

  • HP Insight Dynamics - VSE suite for ProLiant

  • HP Integrated Lights-Out (iLO 2) Advanced Pack

  • HP Accelerated iSCSI Pack

  • HP Insight Power Manager software (IPM)

  • HPE Foundation pack

    The foundation pack includes:

    • HPE SmartStart

    • HPE Management

    • HPE ProLiant Firmware Maintenance

  • Insight Management Providers (WBEM)

  • Insight Management Agents (SNMP)

  • Subscriber's Choice

  • ProLiant Support Packs and ROMPaq, software

Product specifications

Click here to view the specifications page for the HP ProLiant DL360 G6 Server .

Link to driver, firmware, software and manuals

Click here to access the driver, firmware, software and manuals for HP ProLiant DL360 G6 Server.

Link to warranty information

Click here to check the warranty status.

Click here for detailed information regarding worldwide limited warranty and technical support.

Link to QuickSpecs

Information for this Overview is taken from the product QuickSpecs. To access the complete QuickSpecs for this product, select the desired link from the following list:

Click here to view the HP ProLiant DL360 G6 Server Worldwide QuickSpecs in html format.

Click here to view the HP ProLiant DL360 G6 Server Worldwide QuickSpecs in pdf format.

Click here to access the QuickSpecs homepage, which provides access to the QuickSpecs for other regions/countries.

Disclaimer

NOTE: One or more of the links above will take users outside the Hewlett-Packard Enterprise website, HPE does not control and is not responsible for information outside of the HPE website.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!
Slots
  1. Was the information on this page helpful?

Hp Proliant Dl160 G6 Memory Upgrade

Please wait while we process your request.